Page 1 of 3 123 LastLast
Results 1 to 10 of 102

Thread: Parts cross reference thread

Hybrid View

  1. #1
    Senior Member
    Join Date
    Aug 2009
    Posts
    788
    I was just sitting here thinking that it would be helpful to have a thread to address parts cross references to help in a pinch. Here are a couple I've picked up off of here. I thought it would be nice to have a one-stop-shop:

    Oil filter - 07+ Toyota Yaris 1.4L
    Fuel pump (not assembly) - 03 Ford Mustang 3.8L - Walbro 521
    Oxygen sensor - 87 Chevy 1/2 ton 4.3L - Bosch 12014
    IAT - 97 Ford F-150 4.6L

    If I'm wrong, please correct me. As Harley stops supplying these parts, it would help to know how to keep our bikes running.

  2. #2
    Senior Member
    Join Date
    Jan 2014
    Posts
    1,313
    XB Corrugated fuel tube at in take pump.
    ATL CFD402
    http://www.summitracing.com/parts/abt-cfd402

    Very difficult to get on the pump but the length is good.

  3. #3
    Junior Member
    Join Date
    Aug 2016
    Posts
    1
    For the 2 large O-rings on the fuel pump:
    Sur-Seal ORBN151

    Called the Harley dealer first, they never got back to me, so I got 10 of them from amazon for $10.

  4. #4
    Senior Member Simplymichaeljr's Avatar
    Join Date
    Jul 2016
    Location
    Tacoma, wa
    Posts
    318
    Marking this thread. Thanks for the info guys

  5. #5
    Junior Member
    Join Date
    May 2017
    Posts
    5
    Hello all, I am new here but this thread has helped out tons, thanks! I was wondering if anyone had a cross ref part number for the 1125 rear O2 sensor HD p/n P0277.1AM . I know its a Bosch unit but I can't make out the number

    03 XB9
    08 1125
    09 XB12XT

  6. #6
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,517
    Quote Originally Posted by Bubbahotep View Post
    Hello all, I am new here but this thread has helped out tons, thanks! I was wondering if anyone had a cross ref part number for the 1125 rear O2 sensor HD p/n P0277.1AM . I know its a Bosch unit but I can't make out the number

    03 XB9
    08 1125
    09 XB12XT

    you listed 03 and 09 XB's so i'm assuming here that this 1125 O2 sensor you want to "cross-over" is the same reference as those XB models you listed. if that is the case then here's your cross reference list as follows:

    Bosch 12014
    Denso 234-1001
    NTK 21002

  7. #7
    Junior Member
    Join Date
    May 2017
    Posts
    5
    Thanks Lunatic, the Bosch 12014 is the sensor for the older XB's and has a short single wire( avail Carquest $20) but the 1125 has much longer wire and the body of the sensor is about half as long. I guess I could splice the wire but a factory connection would be desirable...

  8. #8
    Junior Member
    Join Date
    May 2017
    Posts
    5
    Hi, I am having a hard time finding rear wheel bearings for my 2003 Buell xb9r. I see part# 6006-2rs what brand is this # for? Thanks.

  9. #9
    Senior Member midway's Avatar
    Join Date
    Jan 2016
    Posts
    361
    Quote Originally Posted by kc8gkd View Post
    I am having a hard time finding rear wheel bearings for my 2003 Buell xb9r.
    http://www.allballsracing.com/

    Enter year, make, model and away you go. I put these front and rear no problem, good service, good product.
    Contact if you are not sure... sales@allballsracing.com
    They are blue, not black or orange in case you have need to match wheels. Best replace them both front and rear together anyway right? Mind the precious spacers, they need to meet the specs for width (end to end) un-crushed and perfect in case somebody over torqued them you should be fine to reuse. If not they're available for 10-11 bucks a piece.
    Last edited by midway; 08-15-2017 at 08:09 PM.

  10. #10
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,517
    Quote Originally Posted by kc8gkd View Post
    Hi, I am having a hard time finding rear wheel bearings for my 2003 Buell xb9r. I see part# 6006-2rs what brand is this # for? Thanks.
    your choice of rear wheel bearing is as follows and you will need 2 for your 2003 XB. the all-balls come 2 per kit:
    6006-2RS-1-C3 *****do NOT try C4.....will not fit
    factory part # is E0005.02A8B 2 per part #
    drag specialties----6169366
    all balls # 25-1627
    E0005.02A8B in fact contains pair of 6006-2RS that you listed.

    you're welcome
    Last edited by lunaticfringe; 08-16-2017 at 09:46 AM.

Page 1 of 3 123 LastLast

Similar Threads

  1. 09 "short o2 sensor" cross reference.
    By Kenleissler in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 4
    Last Post: 09-14-2013, 10:56 PM
  2. Bulb cross reference
    By raz65man in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 4
    Last Post: 05-15-2012, 09:15 PM
  3. Air filter cross reference
    By raz65man in forum Buell Parts Guy Questions and Answers
    Replies: 6
    Last Post: 04-28-2011, 04:52 PM
  4. Parts Cross Reference
    By Macdoodles in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 2
    Last Post: 04-02-2011, 08:06 PM
  5. Clutch cable cross reference
    By Fock347 in forum Buell Firebolt XB12, XB9
    Replies: 1
    Last Post: 05-14-2008, 05:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •