Parts cross reference thread

[christianmb]

I was just sitting here thinking that it would be helpful to have a thread to address parts cross references to help in a pinch. Here are a couple I've picked up off of here. I thought it would be nice to have a one-stop-shop:

Oil filter - 07+ Toyota Yaris 1.4L
Fuel pump (not assembly) - 03 Ford Mustang 3.8L - Walbro 521
Oxygen sensor - 87 Chevy 1/2 ton 4.3L - Bosch 12014
IAT - 97 Ford F-150 4.6L

If I'm wrong, please correct me. As Harley stops supplying these parts, it would help to know how to keep our bikes running.

[Cosworth]

XB Corrugated fuel tube at in take pump.
ATL CFD402
http://www.summitracing.com/parts/abt-cfd402

Very difficult to get on the pump but the length is good.

[himswim]

For the 2 large O-rings on the fuel pump:
Sur-Seal ORBN151

Called the Harley dealer first, they never got back to me, so I got 10 of them from amazon for $10.

[Simplymichaeljr]

Marking this thread. Thanks for the info guys

[Bubbahotep]

Hello all, I am new here but this thread has helped out tons, thanks! I was wondering if anyone had a cross ref part number for the 1125 rear O2 sensor HD p/n P0277.1AM . I know its a Bosch unit but I can't make out the number

03 XB9
08 1125
09 XB12XT

[user_deleted]

Hello all, I am new here but this thread has helped out tons, thanks! I was wondering if anyone had a cross ref part number for the 1125 rear O2 sensor HD p/n P0277.1AM . I know its a Bosch unit but I can't make out the number

03 XB9
08 1125
09 XB12XT

you listed 03 and 09 XB's so i'm assuming here that this 1125 O2 sensor you want to "cross-over" is the same reference as those XB models you listed. if that is the case then here's your cross reference list as follows:

Bosch 12014
Denso 234-1001
NTK 21002

[Bubbahotep]

Thanks Lunatic, the Bosch 12014 is the sensor for the older XB's and has a short single wire( avail Carquest $20) but the 1125 has much longer wire and the body of the sensor is about half as long. I guess I could splice the wire but a factory connection would be desirable...

[kc8gkd]

Hi, I am having a hard time finding rear wheel bearings for my 2003 Buell xb9r. I see part# 6006-2rs what brand is this # for? Thanks.

[midway]

I am having a hard time finding rear wheel bearings for my 2003 Buell xb9r.

http://www.allballsracing.com/

Enter year, make, model and away you go. I put these front and rear no problem, good service, good product.
Contact if you are not sure... sales@allballsracing.com
They are blue, not black or orange in case you have need to match wheels. Best replace them both front and rear together anyway right? Mind the precious spacers, they need to meet the specs for width (end to end) un-crushed and perfect in case somebody over torqued them you should be fine to reuse. If not they're available for 10-11 bucks a piece.

[user_deleted]

Hi, I am having a hard time finding rear wheel bearings for my 2003 Buell xb9r. I see part# 6006-2rs what brand is this # for? Thanks.

your choice of rear wheel bearing is as follows and you will need 2 for your 2003 XB. the all-balls come 2 per kit:
6006-2RS-1-C3 *****do NOT try C4.....will not fit
factory part # is E0005.02A8B 2 per part #
drag specialties----6169366
all balls # 25-1627
E0005.02A8B in fact contains pair of 6006-2RS that you listed.

you're welcome