An update on Gates Idler Pulley #38023...not available at Autozone...available at O'Reilly's, but it's NOT the correct part at all...this is what it turned out to be
Gates #38023
it is way too small and has only a single bearing in it
I'm gonna add this to the thread:
'08+ XB tps sensor, Duralast, can get at autozone or most auto parts stores. used on BMW's, cars & bikes. mine was $80.00 @ autozone. easy to install, you will need a super small 7mm wrench
An update on Gates Idler Pulley #38023...not available at Autozone...available at O'Reilly's, but it's NOT the correct part at all...this is what it turned out to be
Gates #38023
it is way too small and has only a single bearing in it
my bad...it's correct for chain conversion, was looking for a replacement OE pulley, palm to forehead:D
Great thread Im gonna do a chain conversion
you can change the bearings in the pulleywas looking for a replacement OE pulley, palm to forehead
they are 6203-2RS
had to replace the entire pulley...pics are kinda fuzzy, but you can see that the coating was coming off and the bearings were toast when I rolled it across the bench top, got a replacement from Buellsterparts.com
alrighty... a new P/N for you guys doing the front end conversions on your bikes...headlight harness connectors:
male connector...P/N: 73154-96WE
female connector...P/N: 73104-96BK
both are the OEM 4 position connectors....BEWARE the female connector P/N will also come up as a 3 position connector under some searches, your local HD dealer can order 'em MSRP $1.99 ea, but you can get 'em cheaper through Kutterharleydavidson $1.24 ea, newcastleharleydavidson $1.50 ea...when you order, confirm it's the 4 position connector(s)
this would make it more plug n' play rather than hacking up what's already there and having to splice in new blade or bullet connectors, just my 2 cents :D
Great thread. Will be using the fuel pump info myself.
some good info here... maybe Sticky in DIY or Parts Guy Questions area?