Reply With QuoteIf anyone needs to know the Banjo bolts for the brake lines are M10x1.25 and can be found at O'Reilly's
I believe the only exact match is the stock one, but if you ask what filters go with that cross referenced pump they'll give you a few. as far as the o-rings that go around the assembly I would just take a measurement and ask if they have any silicone (I believe that's what they're made up) o-rings of that length. Pretty good odds that they will (or google the length, it's pretty easy).
If anyone needs to know the Banjo bolts for the brake lines are M10x1.25 and can be found at O'Reilly's
How bout a request? .... anybody know the diameter/thickness of the drain plug o-rings so I can go pick up several sets of spares before my next oil change? (primary and swingarm should be the same I imagine)? ... I've searched for it but never came up with a definitive answer ... and last time I did an oil change the o-rings looked ok-ish but i'd rather replace them the next go-around ...
I know I read somewhere that they were the same as some honda model's
Go to Lowe's / Home Depot , in the sink repair section. These o-rings are there. $2-3 for a pack of ten. There are all the ones I've needed for different places.
Sizes #'s 9-13-18-78. Will do all.
Excellent.... All da innernets to you sir....
OEM Idler pulley bearings: found at Ironmachine.com
XB25.BT.BRS...blue seals I believe, for '03-'10 S / R and '08-'10 1125 models... $28.95 pair
XBRR.BT.BR...black seals, early '03 R models... $26.95 pair
I believe the torca clamp part number is 670200
Part # 670200 at O'reillys
If someone wants to verify this,
Neutral Switch. XB9
Harley standard part, 12 bucks online.
http://www.surdyke.com/AdvPartInfo.a...umber=33900-99
33900-99
for the clutch or in the case?
It's probably the same one for the XL
Posting Permissions
