So I got a set of DPR9EIX-9 for my XB12S... will these work ?
Also a 5/8 doesn't fit very well but an 18 mm sure does.. what gives ?
did you leave c out or do you have the wrong plug
Where did u get them from
you have the wrong plug
for comparison:http://www.jegs.com/i/NGK+Spark+Plugs/739/DCPR9EIX/10002/-1
http://www.jegs.com/i/NGK+Spark+Plug...EIX-9/10002/-1
Here they say its just the Hex size and something about not having a cap that makes them different
http://www.buelletinboard.com/forums...hp/t-8429.html
NGK-DCPR9EIX those or the 8's. The 8's are practically stock and the 9's have a better heat resistance. And for your socket, is it an actual spark plug socket or just a regular socket?
Also make sure to gap them to 0.035, which the 8's are already gapped.
My 9's have always been gapped - I check them at counter before buying.
The dcpr9eix plugs i bought were under .030 so i had to gap them. i would have ask for a different set but they had to special order them. Orielly's got them for me for just over 6$