Note of thanks to the Buell experts of this site..the amount of time to get all the techinical fixs on the site is appreciated.. and has made me keep my 06 Blast. I have rebuilt the Benelli 1967 through 1969 line of two cylinders and four cylinders for fifteen years as a hobby Two 125s a 175 the 250 and 350 model. I purchased my blast really with no knolledge of Buell 500cc engine and is the only other bike, beside my Benelli collection, I have owned. It was a nightmare of a bike since the purchase compared my old Benellis until I found the fixes given on this web page. Now I have 17k miles and my new problem is developing pressure after bleeding front brakes (to follow service manuel maintance of front brake fluid change and inspection. I have repeatedly bled off all air ...bubbles stopped coming out after 20 intervals of pumping brake handle and opening bleeder. I added extra fluid as needed per manual and capping Master cylender with with clean inspected cap and seal. Any help or advice appreciated.... Jeff