Looks good i like the re-wrap also!
First off I'd like to thank the forum from buellforums.com for showing me how to do this.
This is how I did mine.
Before I start the project
[img][/img]
Taking everything off I cut the metal just after the second tab that's where ill mount the turn signals
I used black tape to mark where I wanted to cut the plastic on the tail then I cut it and sanded edges then mounted turn signals to the tabs
Then I marked and cut where the tail light would slide into the tail. Also drilled holes for all the wires to be under the seat
Then I got everything fitted right. Then I trimmed the old license plate holder so it can't be seen once I have the plate on
Did some touch ups and recovered my seat and this is the finished product
Looks good i like the re-wrap also!
gud job! looks great