Results 1 to 3 of 3

Thread: XB-Fan blowing 10 amp fuse/ 2008 Ulysess

  1. 07-14-2023, 03:26 PM #1
    Skibum41061961
    Skibum41061961 is offline
    Junior Member
    Join Date
    Jul 2023
    Posts
    9

    XB-Fan blowing 10 amp fuse/ 2008 Ulysess

    Blew the fuse twice. I had taped over the air scoops for the winter, thus I thought I may have damaged the fan. Pulled out the Monoshock . Pulled out the Fan.
    Destroyed the Amp Plug trying to get the pins out. With Jumper wires the fan runs great.
    Next step put it all back together and try a 15 or 20 amp fuse. Seems I have read that the ECM makes a ground circuit to turn the fan on.
    I found no place or way to lubricate the electric fan motor.
    Reply With Quote Reply With Quote
  2. 07-14-2023, 05:14 PM #2
    starman
    starman is offline
    Junior Member
    Join Date
    Feb 2023
    Location
    North Coast
    Posts
    24
    I would recommend checking the wiring harness for damage or short. Not a good idea to increase fuse size. You have a problem and need to figure it out and fix it.
    Last edited by starman; 07-14-2023 at 05:17 PM.
    Reply With Quote Reply With Quote
  3. 07-14-2023, 05:50 PM #3
    Cooter
    Cooter is offline
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,900
    With every sentence it just keeps getting worse


    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules