Page 6 of 7 FirstFirst ... 4567 LastLast
Results 51 to 60 of 63

Thread: Voltage Regulator or Stator?

  1. #51
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,534
    always my pleasure and thanks for the acknowledgment.

  2. #52
    My bike was cutting fuse. I found out the Voltage Regulator was bad. I had an old one from my ducati(scrapped) luckily it was same match.

    After a 2 day ride.. My CEL came on. I checked with the buelltooth dongle and it was reading battery voltage too high. How do I diagnose this.. My headlights are working. No blown fuse yet..

    On the dongle, battery voltage reads up to 16V when cranking the bike.

    I don't have a voltage regulator, but hopefully I'll get one tomorrow.

    My bike is an xb9sx 2009

  3. #53
    Senior Member rb70383's Avatar
    Join Date
    Jul 2008
    Posts
    349
    When cranking 16V?
    Get a meter to see what exactly is going on. That makes no sense. Just cranking voltage should sag a bit, not go up.

  4. #54
    Screenshot_20191119-175723_EcmDroid.jpg here is the reading from my buelltooth

  5. #55
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    7,093
    Still a good idea to get a Voltmeter. They are cheap, even free at Harbor Freight with a coupon, and looks like you'll need a new VR too.

  6. #56
    Senior Member rb70383's Avatar
    Join Date
    Jul 2008
    Posts
    349
    That makes no sense. As per Cooter get a real VOM. Hopefully this winter I'll install one in the dash.

  7. #57
    Okay I went to the store and got this.. Please how do I use.. 15742621541385797414620987186937.jpg

  8. #58

  9. #59
    Thank you very much.. That video was helpful..
    Here is a video

    https://youtu.be/cleYUQrxQls

  10. #60
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,534
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    faulty VR. replace before it burns out all the bulbs and/or the ECM....which it will.
    part # Y0302.5A8---suffix L19D.
    factory shows 87 available....list $119.40
    aren't you in south africa?
    if so and you can't source a new one locally... then purchase it over here BUT have it shipped USPS PRIORITY AIR. your postal service sucks and constantly loses or steals first class air packages.....which also have no tracking.



Page 6 of 7 FirstFirst ... 4567 LastLast

Similar Threads

  1. voltage regulator or stator? Or both?
    By lllightning08 in forum Troubleshooting
    Replies: 7
    Last Post: 11-19-2014, 03:17 PM
  2. WTB xb9 stator and voltage regulator
    By bobaganoosh in forum Buell OEM parts
    Replies: 2
    Last Post: 05-15-2013, 04:16 PM
  3. 1125cr stator/ voltage regulator
    By antser in forum Buell 1125CR
    Replies: 0
    Last Post: 09-28-2012, 06:19 PM
  4. XB Voltage Regulator & Stator
    By harrisiv in forum Buell Parts for Sale
    Replies: 1
    Last Post: 05-20-2012, 07:50 PM
  5. Help! Voltage Regulator, Stator Check
    By 09XB12R in forum Troubleshooting
    Replies: 6
    Last Post: 02-24-2011, 05:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •