Reply With QuoteYes, after you start it, put the multi meter leads in the plug coming from the stator, multi meter switch to AC, should read between 40-55 volts, it does change a bit with RPM.
I'm in Nigeria, yes postal service sucks and first class air packages gets lost.
John can I also test the stator to be sure it's in good state..
I thank you.
Yes, after you start it, put the multi meter leads in the plug coming from the stator, multi meter switch to AC, should read between 40-55 volts, it does change a bit with RPM.
Last edited by njloco; 11-21-2019 at 03:27 AM.
I was able to take a reading of the stator and it shows 65v-120v when i rev and 35v when idle, is this normal? SHould i change stator also. i don't want to buy another VR and it goes bad again.
Posting Permissions