Results 1 to 9 of 9

Thread: do you prepare your carb boot for the superboot

  1. #1
    Junior Member
    Join Date
    Sep 2011
    Posts
    9
    Background///
    With a pro intake, there is similar vibration to stock, but with less reinforcement. so some have used dan's super boot to provide extra stability. i have used it through this past carb boot, but I still had issues that needed moderate attention.

    take away number 1. you really do need to locktight everything. those who have blasted before are probably laughing.

    Main question/// for those who use the superboot, looking at the boot post use, i get the impression i would tighten the thing down, and vibration would sand the middle ridge flat. it would then be just loose enough, that then i'd have an issue, tighten down again, and be good to go. But with more vibration, another leak, ect.....

    you can see a stock boot on the left and a boot with 400 miles on it to the right.

    my thought before i replace put the new one on is to sand/ cut that middle ridge off. i think that will allow for a fantastic solid seal and support.

    I assume this will get rid of my problems.

    anyone ever do something similar or do you have another idea to share. also attached is the super boot to show what I'm talking about for those new to blasts.

    wear gear, ride safe.




  2. #2
    Senior Member
    Join Date
    Jan 2007
    Posts
    624
    My super boot has been no trouble with close to 10,000 miles so far.
    EZ

  3. #3
    Senior Member jetlee's Avatar
    Join Date
    Jan 2009
    Location
    SF East Bay
    Posts
    1,162
    Mine's had a few thousand miles and numerous on/offs and it's still going strong.

  4. #4
    Senior Member
    Join Date
    Mar 2012
    Posts
    271
    Dan sands the middle ridge flat with the superboot. The stock boot is still used thoughh.

    What I do sand the middle ridge flat on the new boot from HD. I replace the boot every few thousand miles just to be safe, and reuse the support of the superboot.

  5. #5
    Senior Member
    Join Date
    Jan 2007
    Posts
    624
    - smartest!
    EZ

  6. #6
    Junior Member
    Join Date
    Sep 2011
    Posts
    9
    thank you all.

    i will continue using the stock carb boot from harley.

    i will sand the middle ridge down.

    i will locktight.

    i will enjoy the superboot for many thousands of miles to come.

  7. #7
    Whats the deal with Dans super boot? Is it made of unobtainium? New to Buell and keep seeing Dans name pop up, but yet to find a place to buy such a thing or even a picture of it. Did see a post on another web site that said you have to buy them from me, but got no responds.

  8. #8
    Dan's Super Boot on Ebay It took me a whole 30 seconds search time to find it. At this url you will find the picture and instructions on how to purchase.

  9. #9
    Thanks, I was putting in Das Boot. Had searched several time and could not find it.



Similar Threads

  1. Dans superboot questions
    By shakinittwice in forum Modifications
    Replies: 2
    Last Post: 05-31-2015, 09:48 PM
  2. Carb and intake hanging from boot alone?
    By qurtrn10 in forum Buell Blast
    Replies: 6
    Last Post: 06-06-2014, 03:52 PM
  3. Superboot Replacement
    By jimboruss in forum Modifications
    Replies: 1
    Last Post: 03-13-2014, 03:57 PM
  4. Dead bike w/ new boot, cleaned carb, new plug. Thoughts?
    By dimitry in forum Troubleshooting
    Replies: 2
    Last Post: 08-23-2012, 11:10 PM
  5. 2000 Buell Blast Rear Brake and Carb boot
    By JonathanZ in forum Troubleshooting
    Replies: 3
    Last Post: 06-06-2012, 10:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •