It's kinda unique. I have a spare one if you need. (Assuming the bolt is the same on an S.)
Edit: Nevermind. My reading comprehension is off on Sundays. I have the bolt for the clutch lever.
Can anyone tell me what size bolt goes in the shift lever for an 07 xb12r? Can I find something that will work locally or do I need to replace it oem style?
It's kinda unique. I have a spare one if you need. (Assuming the bolt is the same on an S.)
Edit: Nevermind. My reading comprehension is off on Sundays. I have the bolt for the clutch lever.
Looks like a 5/16-18 shoulder/flange head bolt aprox 1.25 long. I am rebuilding my trans now after a lockup, and have to replace mine, probably use a nice stainless bolt and washer vrs the expensive (if you can even get it) HD shoulder bolt.
Mine is an 05 and the PN = CA0015.02A8
Hope this helps
Thanks bigflash1. It turned out to be a 10/24 x 3/4in shoulder bolt. I couldn't find that exact one so I got a 10/24 x 1in hex bolt with a lock nut. I went an extra 1/4in so that it can take the nut. Head's up, I dont think you'll be able to use one as long as 1.25in but then again if you're rebuilding I guess you can make it work.
Oh! The bolt I was talking about was the one that connects the shifter to the side of the case. You are talking about the small socket head cap screws that connect the linkages.
I found some 10-24 x.75 stainless socket head cap screws at homedepot. They were $.20 I think.