Results 1 to 6 of 6

Thread: ECM problem need help!!

  1. #1
    Senior Member
    Join Date
    Feb 2012
    Posts
    667
    So i went and copied over a race map onto my stock map and when i went to start the bike, its just ticks really fast so i turned the key off and tried starting it again. It started but ran really off idling all weird and stuff. So i went to do a tps reset and i went to start my bike and nothing again i tried multiple times. So i went and copy and pasted my stock map back onto it and then burned the map and now the bike just does the ticking thing again and wont start. I have no idea what to do.

  2. #2
    Senior Member
    Join Date
    Jul 2011
    Posts
    320
    do you have the all eeprom code saved some were?
    you should reflash the all eeprom, then do a good tps reset, if still no go them the problem can be some were else
    hope you can start her up shortly

  3. #3
    Senior Member
    Join Date
    Feb 2012
    Posts
    667
    Sorry for being dumb, but what exactly do you mean by my all epromm code?

  4. #4
    Senior Member
    Join Date
    Jul 2011
    Posts
    320
    you can mess around the complete eeprom code or just the fuel and timing maps
    The complete eeprom code is where all the brain functions are, all sensors corrections etc etc

  5. #5
    Senior Member
    Join Date
    Feb 2012
    Posts
    667
    Where would i find that? would i have to have fetched my ecm before i did anything. If i would i didnt do that...

  6. #6
    Senior Member
    Join Date
    Jul 2011
    Posts
    320
    yes you should save the eeprom in a safe file before starting messing about
    PM sent



Similar Threads

  1. Odd problem....
    By Radiati0n in forum Buell Firebolt XB12, XB9
    Replies: 7
    Last Post: 07-18-2012, 05:41 PM
  2. I have a problem!!!!!!!! Please Help
    By jtown125 in forum Troubleshooting
    Replies: 18
    Last Post: 04-07-2011, 08:33 PM
  3. anyone one else have this problem
    By 08supermoto in forum Buell Firebolt XB12, XB9
    Replies: 7
    Last Post: 09-21-2010, 09:37 AM
  4. what might be the problem?
    By monkeyn9ne in forum Troubleshooting
    Replies: 4
    Last Post: 08-19-2010, 12:05 PM
  5. another problem...
    By 09XB12R in forum Troubleshooting
    Replies: 3
    Last Post: 05-12-2009, 04:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •