Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: swapping x1 dash onto blast

  1. #1
    I know I see it somewhere on here or the old fourm. I just got a x1 dash and I'm trying to find wiring diagrams for the x1 and the blast. I know I've seen it in a pic but I can't find it.

  2. #2
    are you sure it was a x1 dash and not a m2? i dont think a x1 would fit with blast the windscreen on. people switch it for the m2 all the time though

  3. #3
    Junior Member
    Join Date
    May 2012
    A Buell tach, odom, & speedometer combo may be Mothumper610's objective. I know I've thought about it. Anyone know a work around to fit an X1 or custom dash onto a P3?

  4. #4
    yes x1. just a little dremmel work around the key switch and on the mounting hole and its on. now the harder part is wiring its giving me a headache. i have power to both gauges and have the tach hooked up to the coil but the tach is jumpy and will only top 2K. after reading all the diagrams i thought i had this figured out but its looking like its gonna be a two day project now

    also no signal to the speedo :(

  5. #5

    rough fit

  6. #6
    no one has anything on this!!!

  7. #7
    Ive given up on this for the time being. I can't let my bike rest in the garage for too long. Using a spark multiplier seem to be the way to make the tach work but I'm having a hard time finding one.
    Further more I've come to the conclusion that my speedo desnt work so back to the stock speedily but keeping the x1 dash. Possibly looking at aftermarket speedily and tach. Now if only I can get the dumby lights to work right.

    Still thumpin

  8. #8
    Senior Member
    Join Date
    Mar 2012
    I don't think the tach is designed for a single. When choosing a tach you must find one that is designed for single cylinder applications. Usually they have a button in the rear that you press as instructed and it changes the number of cylinders that you are using.

    I have seen the casing used with the gauge of the blast retained and then an aftermarket tach used in place, but never just a pure swap. Good luck though, not sure if you will ever be able to get it up and running as it should.

  9. #9

  10. #10
    Senior Member
    Join Date
    Mar 2012
    Good luck with that.

Page 1 of 2 12 LastLast

Similar Threads

  1. Swapping Swingarms, HELP!!!!
    By BimmerFREAK09 in forum Buell Firebolt XB12, XB9
    Replies: 6
    Last Post: 01-18-2013, 02:20 AM
  2. swapping parts from a uly to a SS
    By ElroySS in forum Buell Ulysses XB12x
    Replies: 3
    Last Post: 08-18-2011, 10:56 AM
  3. Swapping triples
    By worldwidewille in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 6
    Last Post: 05-19-2011, 09:07 AM
  4. Swapping 9 engine for a 12
    By BuellerPilot in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 7
    Last Post: 08-17-2010, 09:34 AM
  5. Swapping from a 984 to 1203?
    By BPlass in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 16
    Last Post: 06-20-2010, 01:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts