the short answer is yes, but I've never seen it done.
Does anyone know if it is possible to install a external oil cooler on the blast, just to increase capacity and keep her a little cooler.
the short answer is yes, but I've never seen it done.
Several have done it.
http://buellridersonline.com/forum/m...il-cooler.html
like daali said, theres alot of people who have done it
I have an oil cooler. However, there really is no need unless you have done significant work on your engine. Most modified engines/heads etc have a tendency to run hot with the higher revs in place and extended top end (120's + ) so an oil cooler can help.
Just make sure to place it in line after the oil pump so it is pressurized.