Ima be looking for some of these here inthe future lo
Ima be looking for some of these here inthe future lo
Theycallmecrash, you will want to find them with a rear brake line and master cylinder at the very least to make them work. You will also need to buy the drop bracket for the clutch lever. I got these with a complete rear brake setup so I swapped it all over to my bike. The master cylinder from your bike would work if you drilled out the mounting holes so it can mount to these. Keep in mind your driver pegs will drop close to 3inches compared to what you have now.
Look here for all the info/part numbers that I've outlined. http://www.buellxb.com/Buell-XB-Foru...ootpeg-Options
For those interested in the LED's you will need the NEO3 (T-1). The SMD is a lower profile than the stock bulb or the other type of LED, it is also brighter! You will need 3 bulbs, here is the link LED. Follow the xbdashboards how-to on their site but when you get the cluster off all you have to do is remove the 2 center phillips screws and NOT the 7. You will be able to see the 3 bulbs, turn them 1/4 and pop them out from the back side. Try the unassembled cluster with the LED's to make sure they all light up, if not turn the bulb around and it will work.:D