Oberon Bar End Mirror Hardware Help

[misternikko]

One of my Oberon bar end mirrors lost the little allen head pinch bolt that holds the mirror into the bar end today.

Just got back from Ace Hardware and they determined it was 7/16" however did not have that size.

I need to replace that piece and dont know what to search for. Can anyone let me know what that is called or even better direct me to where I can purchase one?

It is the little allen plug at the face of the bar end seen here:

http://www.lowbrowcustoms.com/images...or-photo-1.jpg

[Loki]

Very possible it is custom made.

[misternikko]

Ace had the part, just one size too big. Looks like a standard piece to me. Just dont know what to search for.

7/16" hex head screw didnt yield the correct results. Im prob just calling it the wrong thing.

[anrkizm95]

http://www.oberon-performance.com/ac...are_Parts.html

allen head set screw
http://www.oltonwelding.com/salescar...sSetScrews.htm

[misternikko]

Thanks Anrkizm I had already gone there but they didnt have that piece. Just the collets and a few other items.

[anrkizm95]

http://www.oltonwelding.com/salescar...sSetScrews.htm
allen head set screws

[misternikko]

ahh...close but a little too big. Looks like I need 7/16" x 1/2"

:(

[misternikko]

bam! but u did help me know what to search for I think this might be it!

http://www.fastenal.com/web/products...l.ex?sku=73330

[anrkizm95]

home depot or your local nut and bolt shop

[misternikko]

they all suck ass... no dice. Fastenal has it but they want $10 to ship me a $1 part...cunts. Gonna call em tomorrow and see if they can ship to the local store for free.

Just in case this happens to anyone again here is what you need:

7/16"-14 x 1/2" Stainless Steel Cup Point Socket Set Screw
Sku: 73330
From: Fastenal