Lowering
Any time you wanna do a search, go to your google tool bar window and type buellxb.com, and whatever it is your looking for.
Hey guys,
Im looking to lower my 2008 Buell XB12R... Can someone please help me out as to how to do this!? I've been researching like a mad man but coming up empty handed.
Lowering
Any time you wanna do a search, go to your google tool bar window and type buellxb.com, and whatever it is your looking for.
Check your pm. I have a XB12scg shock for sale.
i have been reading on other threads that guys are using xb12scg shocks but i haven't seen any pictures. I am curious as too how much it will be lowered using that shock.
standard on the left, low on the right...it's about 2", look at the front fork below, this is on the low, 1st pic, the standard will be above the top screw of the fender, 2nd pic
Thanks for the pictures thrst. much appreciated. what about below, how could i achieve this height but a little bit raised from that, i dont want my under sling draggin around corners...does this look like air ride to anyone?
/Users/MKazel12/Desktop/P1000943.jpg
nvm, i cant seem to be able to post a picture on here.
How much you want for that shock redrider?
pipe clears going around corners, it's the dang speed bumps that will...have to cross them at an angle slowly if you can't go around 'em, had to do that before swapping my suspension to the standard setup...you can look at pinwall cycles on evilbay, they usually have a shock or two for $50, forks as well, but you may have to contact them directly to verify the forks are the "low" ones, rear shock is easy to spot due to the color of the spring being yellow, good luck