looking for 1125R clipons!

[1125RCya]

I have the EBR upper triple tree, steering stop and clip-ons coming in the mail. Now the headache, from a bit of research I found out the stock controls won't work.
I hope I can keep this street legal with the clip-ons.
I'm not sure what to use for my break and clutch controls.
Any Ideas?

[Bossanova]

I have the same set up (EBR upper). I went with the Accossato but not from EBR. 19 x 18 Brake and the 16 x 18 Clutch. You will have to source the bango bolt locally (the one they send with the master is for a dual line). I can't remember the thread count but I think there are only two. Also the reservoir brackets that come with the masters are cheesy so I went with something different. Be careful- with the steering stop installed, it GREATLY reduces your turn radius and the bike slow speed maneuverability. No place to mount mirrors other than maybe bar-end style. Good luck!

[Kruizen]

You can still use Brembo, but you need to get their pressure switches to activate the brake lights.

[1125RCya]

I'm thinking about buying longer tubes from woodcraft and using all stock controls for the moment,!