^ There you go... Sorry Dan I couldn't recall your forum user name.
well I don't care if they are scratched so do you have ones that are only scratched not dented?
^ There you go... Sorry Dan I couldn't recall your forum user name.
Np Boss.
The two i have are dented but there so small it hard to see them.
Can't even get it to show in a pic but its there.
ok and you said your number is on your ebay account? i couldn't find it anywere so i sent you a message on ebay. how much would you charge for the velocity stack and the air filter? and do i need anything else other than those to items to be able to take out my airbox? you said the stock one is discontinued, does any one know if i could go to a buell/Harley dealer and get one from them.
Just click on my user name Thumpe right on this post an my contact info is right there also.
The plastic velocity stack i was talking about is an aftermarket that they discontinued not stock.
The other thing is the PVC line off the head that runs into the airbox you need put a breather filter on that.
An you will need to re-jet the carb.
How much for a new one or the scratch n dent setup?
how much for the scratch and dent one. and wow I didn't know you had to re jet the carb. do I have to just take the jets out and put the new ones in or do I have to adjust it ( take it to the shop). cuz im not looking at doing that. I thought you just took the airbox out put the stack and the carb and slap a filter on it. how much is this gonna cost altogether and how much labor is it gonna take. im lookin for easy fixes, then if thst don't work move on to harder stuff.
ok sorry if this is an inconvieniece but I called mancuso and they had the stock pieces I needed and it was like $25 so I don't need the jets or the velocity stack any more. apparently the stock piece isn't a velocity stack I forget what he called it. the piece I need was $2. plus the gasket and the manifold that made it $25.