You want to remove the whole clutch right?
The best thing to do first is to get a service manual for your blast.
Hey
So basically I have no clue on the mechanics of motorcycles and I need to remove a clutch from my blast.
Can anyone guide me through this? Give me a list of tools i need and what I need to do. Also what i need to be careful for. Or a video would be nice.
Anything can help!
Thanks!
You want to remove the whole clutch right?
The best thing to do first is to get a service manual for your blast.
http://www.americansportbike.com/sho...show/5493.html
http://www.americansportbike.com/sho...how/16075.html
Here are a couple of the specialty tools youll need. Some larger sized sockets, the standard sized set of allens, as 3/8" sockets. Not little "L" allen wrenches.
You will need, primary cover gasket, shifter shaft seal and bushing, and the appropriate fluid for the primary when back together.
Removal procedure is pretty straight forward, clutch is inside the primary, get inside that thing and remove it.
I suspect you are attempting the auto clutch setup, as far as special installation and clutch adjustment cant help you.
Now for my opinion. If you dont have mechanical experience, dont try this. Also do not attempt with out above special tools. Mostly, i still dont think the auto clutch is worth the money or gain you what you want.