sounds like the harness feeding your instrument panel got cut on a bracket or a ground came loose.
So I was riding down the highway, when all off a sudden my instrument panel stops working. I pull off to the side and come to find out that my turn signals won't work anymore, the neutral light doesn't show, but the high beam light shows on my instrument panel. I checked all the fuses and everything is good, I also disconnected and reconnected everything. I even also let the battery charged all night, but nothing starts. The bike works fine, I just have to feel where the neutral is and use a lot of hand and arm signals. What could be the problem?
sounds like the harness feeding your instrument panel got cut on a bracket or a ground came loose.
I checked everything ...but I cant seem to find the problem
Check the common ground point for all the lights behind the headlight bucket on the lower triple. All mine had broken except for a few strands and my lights were intermittant. GL
Is there anyway u can post a pic of which one i am suppose to look at.
Maybe stator?
I would think it was stator if ALL electronics died, but he said it was just the instrument cluster.
I had sililar symptoms a few weeks ago, and it turned out that i had a broken wire to the ignition switch. Pop off the bottom cover and check all of those wires.