Are they staying on solid with the ignition on or are they on solid when you try to use your signals?
Can somebody help me asap plz I just bought some led strips from Walmart I see ppl putting them on as turn signals but when I plug them in on the back they just stay solid sorry for the nube question is it my flasher or do I needa buy different strips
Are they staying on solid with the ignition on or are they on solid when you try to use your signals?
Go on Google type buellxb.com led flasher mod.
Its the flasher not the lights
Anytime you use LEDs in place of a "regular" bulb, you'll need to change the relay. I have LEDs all around my bike (Lights, accents, etc.) and a new relay was needed. Start there.
Also, check your local laws. Our turn signals cannot be flush mounted.
you don.t need to change the relay there is a relay mod you can do when you open the stock relay there is an ic chip with 8 legs on them . cut the second leg on the right
Which side is the right :p??