, flash, standard, flashing, tunerpro, ecmspy, learn, running, honestly" /> Flashing Race map to stock ECM?
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Flashing Race map to stock ECM?

  1. #1
    can anyone flash a standard race map to my stock ECM? Ive got a K&N and Magniflow muffler and want to mod the air box but its already running lean. I honestly dont have time to learn how to do this myself with tunerpro or ecmspy, hell, I hardly find the time to ride sometimes.....

    I know this would be a "custom" tune but im okay with that as long as its better than it currently is.

    Availability? Cost?

    I live in Dallas if anyone is local......

    PM me if necessary

  2. #2
    Senior Member ich's Avatar
    Join Date
    Oct 2010
    Posts
    685
    but its already running lean.
    bull****. buells don't run lean.

  3. #3
    Senior Member
    Join Date
    Aug 2012
    Posts
    2,408
    bull****. buells don't run lean.
    So let me ask you, say im cruising down the high way, my AFV comes down to 85 so that it cruises with a stoich AFR. Well then i drop a few gears hit 6000rpm with a correction of -15% to a fuel map thats not properly setup even with enrichments is still lean.... Is it gonna get leaner?....the answer is yes. This is how Buells run lean.

  4. #4
    Senior Member
    Join Date
    Sep 2010
    Posts
    4,403
    What year is your bike? It's pretty easy to do depending on the year.

  5. #5
    Senior Member ich's Avatar
    Join Date
    Oct 2010
    Posts
    685
    o allah, how often? i'm so tired to respond to these brainless posts ...
    afv is designed that way, that the bike is running rich 5% in ol, and 10% in wot. if an idiot ****ed up his bike or the map or something else and the bike will therefore tend to run lean in open loop, ol learn will add fuel within 3 seconds.

  6. #6
    Senior Member
    Join Date
    Jun 2012
    Posts
    801
    Then don't answer the posts ich...lol

    It's really not that difficult and doesn't take much time at all. You just need to purchase a cable and the older free version of ECMspy works just fine on pre '07 bikes.

  7. #7
    Senior Member ich's Avatar
    Join Date
    Oct 2010
    Posts
    685
    Then don't answer the posts ichl
    so some braindead idiots start spamming their bull**** over this forum once more?

    It's really not that difficult and doesn't take much time at all
    it is difficult and it takes quite some time. and no, it's not done by getting a cable.
    it requires brain. that's the main constraint.

  8. #8
    Junior Member
    Join Date
    Sep 2013
    Posts
    3
    Anyone know of a performance ecm upgrade I know the buell race ignition is obsolete so need to find a diffrent tuner

  9. #9
    Senior Member
    Join Date
    Jun 2012
    Posts
    801
    Huh? Can you be a little more specific...are you talking about the BUELL race ECM?

  10. #10
    I haven't used him, but I've read this Dallas tuner is pro: http://www.thedynodifference.com/



Page 1 of 2 12 LastLast

Similar Threads

  1. Flashing a Race Map to ALL Buells (08+ too)
    By theoctopus in forum Do-It-Yourself Buell Mods
    Replies: 133
    Last Post: 05-26-2014, 04:56 PM
  2. Replies: 23
    Last Post: 02-19-2012, 09:41 PM
  3. stock vs race ecm
    By c818919 in forum Buell 1125R
    Replies: 2
    Last Post: 12-02-2011, 03:49 AM
  4. race ECM or stock ECM?....
    By iman501 in forum General Motorcycle Chat
    Replies: 6
    Last Post: 03-07-2011, 06:08 AM
  5. Flashing stock to race map help!
    By NOMADIC in forum Troubleshooting
    Replies: 16
    Last Post: 03-20-2010, 09:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •