Hello,
I am in search of a Power Commander (PC) for my 2009 1125 CR bike. I found a few PC that were listed for a 1125 R, however, does anyone know if the 1125 R PC is compatible with a 1125 CR? If yes, does anyone know of where I can find a site to order from?
Any information would greatly be appreciated.
Thanks,
Sean
Well I don't know much about it yet. But I will be needing a power cammandor in a few months. With the research iv done. A quick google search for "power commandar 1125r" that's what I used. Also yes it will work on your cr. It's what I have too. If I remember right first or second website I went to had it for 287 or something like that.
John why will you need a power commander...
The R and cr are geared dfferent. Keep that in mind.
Also when buying an ecm from ebr they are listed differently. One for R and one for CR. Also bad titan is asking a very good question. Piggy back systems don't work well with ddfi. You would be better getting a tuned ecm or tuning yourself.
There is no need for this on our bikes.. only really needed for fine tuning of turbo bikes or bikes that will spray... just wondering.. don't like to see people waste money.. just because they are available for our bikes doesn't mean that they are needed or intended.. just my 2ยข
Yes it's fine. I'm getting a dyno in my shop should be here in a few weeks. So with that dyno I believe it won't be able to read my ebr ECM. Because dyno jets software has no way of communicating with the ebr ECM unless I have the cammandor which runs off of dyno jets software.
And how could I own a dyno without having a dyno tuned bike! I'd be crazy hahah
I was told that a power commander will not STACK properly to the ecm.. you will waste your money and time.. I personally went with the EBR Race ecm programed to my rt5 exhaust. . FYI
Cr and R are interchangeable.
http://www.badweatherbikers.com/buel...tml?1359705880
Posting Permissions
Reply With Quote