Front fork Oli grade/Clutch replacement

[camrojas]

hey guys,

I have been a member for a while but had to create a new account.

I am looking for help with the following questions(all questions are in regards to a 2006 xb12r).

1. Do you guys know what graded of oil to use in the front forks?

2. also does any one have a link or list of part numbers for everything need in a clutch replacement job?

Thanks

[Cosworth]

Type E fork oil or 10 weight is stock

[user_deleted]

what cosworth said. 10 wt. or 7.5 for colder climates. 16 US ounces per fork from full dry drain.

clutch--you'll need the seal, washer, the friction plates, the drive plates, new diaphragm spring (suggested) and spring compression tool to do the job. energy one makes a complete kit and their compression tool is a fraction of the price of the H-D tool but have heard complaints about the drive plates in their kit. any H-D dealer can get you the friction and drive plates if you want to go that route.

[camrojas]

Do i have to change the gasket on the transfer case?

[Cosworth]

Primary cover gasket? If you can get it off in good shape ive reused them before, kinda depends how old it is.

[go cytocis]

The old school fluid for both your questions 1 & 2 (guaranteed to illicit shock & horror from oil label whores) is just plain old ATF in both the forks & primary.

[50dro]

We can get you the Energy 1 Clutch kit if you're interested. HERE it is on our site. We can get it with the tool as well for another $50 or so (but we'll have to check on that for you.) Let us know if we can help.