Someone could have done a specific tune for that bike with mods that were on it.
I have a 2006 XB12 SS with a D&D, K&N filter, and Breather mod. I bought this bike used 2 years ago and I'm curious on what maps i have. So i tried to match up all the maps i have and nothing come close to them. If some one could shed some light on the pictures i post and tell me if they look alright or there looks to be something wrong. Thank you guys very much for your time,
EEPROM
Fuel maps
Someone could have done a specific tune for that bike with mods that were on it.
^ I was thinking that as well.
It might also be a Buell factory race kit ECM, or an EBR ECM. It's a small amount of work, but you can check behind the front fairing to see what is written on the ECM.
It's an S...look under the seat. A race ecm will say "RACE USE ONLY" on it.
I looked for that a while ago and its not a EBR ecm thanks for the good ideas tho guys!
does it run well? or are you having concerns?
Thanks. That's what I get for not sleeping enough!It's an S...look under the seat.
It still might be a Buell factory race ecm. I'm basing that on the Calib. ID 0xEE.I looked for that a while ago and its not a EBR ecm thanks for the good ideas tho guys!
Can you read the part# on the ECM? Is it 32621-03Y,
The Part # that's on the ECU is Y0152 3ab 05322
It does for the most part, but it likes to buck at 2000 to 2800 RPM i know that's a common thing. But if i don't have a custom map i was going to get it done. This is the reason why i'm looking to find the origin of the map i have on this bike.does it run well? or are you having concerns?
That is a stock ECM p/n. I still think you probably have a factory race or EBR race image flashed into a stock ECM. I just can't see anyone not Buell or EBR making a custom tune and then changing the calibration id. I'm not sure most would even think to do that. Just a guess, though.Originally Posted by 06XB12SS_LOVER