renthal fatbar rc highs

[Kongy]

Will these fit my xb9sx with fatbar risers? Specifically will cables be ok?

[Cosworth]

Your xb9sx uses 7/8 bars, those show to be 1-1/8 at the clamping point so these will not work without a bar adapter.

[Kongy]

yeah I know thats what I meant with fatbar risers eg adapter, guess wasnt clear but anyway more concerned about length of wires/cables

[Cosworth]

Gotcha, which version are you looking at using? There appears to be several dimensions avaliable. I personally cant comment if they will work or not I went lower with crossroads bars.

But based on OE equipment, it looks like if you go too tall you'll need ulysses cables.

[Kongy]

the RC high dimensions, might just bite the bullet and try them if not then uly cables too haha

[Cosworth]

I think stock height dimension on the xbs handlebars is 3.5" those fatbars are 3.75" (but you have to add the height of your riser) your also gaining some width looks like about 3" wider.

It'd be a stretch to make the stock xbs cables work.

[thrstrmech]

Use this and this to insure the proper control length will work, cause you'll have to cut those down for the cables to function properly. Click on the spec icon.