Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Ecm droid not connecting

  1. #1
    Junior Member
    Join Date
    Aug 2013
    Posts
    23
    Hi everyone, I have been trying for weeks to get my bluetooth adapter to connect to my bike. It's a 09 xb9sx. I have had no luck at all. I keep getting an error saying "timeout reading 0 from 6 bytes". I know some other people have had this issue and want to know what they did to fix the issue? I have made sure the baud rate is set to 9600, made sure the voltage is knocked down to power the module also. I have tried 3 modules and each says the same thing. HELP!

  2. #2
    I don't know if this is your problem but 09's are ddfi3

  3. #3
    Junior Member
    Join Date
    Aug 2013
    Posts
    23
    This is a picture from a different post on the form.

  4. #4
    Senior Member neilrl79's Avatar
    Join Date
    Feb 2012
    Location
    Cecil County, Maryland
    Posts
    1,239
    Make sure that you have paired the bluetooth adapter to your phone in the phones settings menu. After successfully pairing the Bluetooth module turn the bike off then back on and hit connect in Ecmdroid. I found it would connect and read fine if I hit connect within 30 seconds of turning the bike on but if I let it sit for a while before hitting connect it would error out.

  5. #5
    Junior Member
    Join Date
    Aug 2013
    Posts
    23
    Thanks, I'll try that when I get home and report back.

  6. #6
    Junior Member
    Join Date
    Aug 2013
    Posts
    23
    I tried to get connected right after turning the ignition on but still had no luck. It says "reading ecm' immediately followed by "timeout reading 0 from 6 bytes".

  7. #7
    Senior Member neilrl79's Avatar
    Join Date
    Feb 2012
    Location
    Cecil County, Maryland
    Posts
    1,239
    Did you build it or did you but it from someone? When I built my own I could never get it to connect. Something was wrong with the the data lines but I couldn't figure out what it was. In the end I bought one from the group buy on here and it has worked perfect so far.

  8. #8
    Junior Member
    Join Date
    Aug 2013
    Posts
    23
    Built it. I might have to just buy one. Unless someone else has had the save problem and knows how to fix it! Does anyone still make them?

  9. #9
    Senior Member
    Join Date
    Jan 2009
    Location
    New Mexico
    Posts
    128
    Mine is doing this too. I haven't used it in a while, been using USB to a laptop, but decided to log with it the other day. It used to work fine; I bought it from Xopti a while back.

  10. #10
    Banned
    Join Date
    Aug 2015
    Location
    Northern Arizona
    Posts
    20
    I bought one and can't get it to work either, damn electronic crap!
    Just ordered a Mikuni carb, I know it will work!
    I have a complete Buell EFI system for FREE, you just got to dig it out of my trash can, and fix the bullet holes in it.



Page 1 of 2 12 LastLast

Similar Threads

  1. ECM droid
    By kaktus in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 2
    Last Post: 04-01-2019, 10:06 PM
  2. ECM DROID help
    By doberdann1019 in forum Buell Lightning XB12S, XB12Ss, CityX, XB12Scg
    Replies: 63
    Last Post: 08-22-2014, 11:40 AM
  3. Ecm droid experience?
    By HMTRAN in forum Troubleshooting
    Replies: 15
    Last Post: 04-11-2013, 07:01 PM
  4. camera app for droid
    By USn2Boyz in forum General Motorcycle Chat
    Replies: 6
    Last Post: 02-22-2011, 08:16 AM
  5. Droid Pro GPS Mount?
    By 2004xb12s in forum Buell Parts Guy Questions and Answers
    Replies: 10
    Last Post: 01-05-2011, 04:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •