Page 1 of 12 12311 ... LastLast
Results 1 to 10 of 131

Thread: Want to buy IAC

Hybrid View

  1. #1
    Senior Member AZmidget91's Avatar
    Join Date
    Dec 2014
    Posts
    1,664
    Looking for an IAC for my 08 XB12SCG

    IAC-Idle Air Control

    Only bike 08-10 had IAC's

    They are $155 from Harley new, there is a complete throttle body on eBay for $149, I have an offer submitted on right now.

    That being said I would buy a complete throttle body, if you don't want to part out the TB.

  2. #2
    Thank You for your troubleshooting diagnostic. Looks like I'm in the same boat. All my symptoms pointed to an intake leak. Replaced the seals with New James seals and Sil-Glyde.
    The old seals looked good... The symptoms kinda only changed a lil... Still boggy and slow and not crisp off idle. Now I'm getting the IAC too low CEL. Btw this is on an '09 xb12r.

    I am going to use Hylomar sealant when I put a second set of seals in... This is what Mike Cobb told me to use.

  3. #3
    Senior Member AZmidget91's Avatar
    Join Date
    Dec 2014
    Posts
    1,664
    Ten ****ing letters

  4. #4
    Banned
    Join Date
    May 2014
    Location
    Seattle
    Posts
    1,636
    I had code 34 on 2009 Bell XB and similar idle issue after cleaning the intake body and replacing all seals. After application Seafoam there are no engine check light and idle issues anymore.

  5. #5
    Senior Member rchuff's Avatar
    Join Date
    Apr 2012
    Location
    Willow Grove, Pa
    Posts
    2,018
    You know that works better than seafoam! This new magic wand I just got. It fixes flat tires, blown headlights, blown fuses even locked up engines. I got it in Harry Potter land.

  6. #6
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    aDw2Qnd_700b.jpg
    Quote Originally Posted by rchuff View Post
    You know that works better than seafoam! This new magic wand I just got. It fixes flat tires, blown headlights, blown fuses even locked up engines. I got it in Harry Potter land.

  7. #7
    Senior Member
    Join Date
    Aug 2016
    Location
    Santa Cruz Mountains
    Posts
    237
    Quote Originally Posted by buell248 View Post
    Fix-A-Flat, Just put a whole can in the gas tank!
    Works better in the oil tank...

  8. #8
    Senior Member wickedchop's Avatar
    Join Date
    Jun 2015
    Location
    New Jersey
    Posts
    1,451
    Ahhhh the old magic wand. Mine doesn't work so well, I got mine at harbor freight though so its probably Chinese junk. Maybe ill just retire it and use it as a pry bar.

  9. #9
    Senior Member rchuff's Avatar
    Join Date
    Apr 2012
    Location
    Willow Grove, Pa
    Posts
    2,018
    They do make great pry bars! You really need to get it at Harry Potter land, all that stuff is real.

  10. #10
    Banned
    Join Date
    May 2014
    Location
    Seattle
    Posts
    1,636
    Possibly the new intake manifold seals did not fully contact with engine surfaces after installation because of friction force and misalignments, so they was leaking. Seafoam lubricated the seals and they slided down under clamping force and engine vibration so now they perfectly match the surfaces should be sealed eliminating leaks, so no idle issues and engine check light anymore. AZmidget91 fixed the error 34 reinstalling the intake manifold seals. There is no magic.
    Last edited by TPEHAK; 11-24-2016 at 03:23 AM.

Page 1 of 12 12311 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •