This is the culprit if my description was inadequate
So I have to get this noise to stop it seems to of gotten worst after riding for the first time today. Recently had bearings done and put bike together to spec. Now the front pulley/sprocket is squealing away horribly. First noise was belt clicking on rear sprocket and tensioner pulley making slight noise now the front one is horribly loud both forward and back so how to remove and check that or is there some pb blast I can spray on there to free itself up? I really wanna ride without sounding like a door slowly opening and closing
This is the culprit if my description was inadequate
After tinkering with the squeak I have determined it is the belt touching the edge of the sprocket in front. It keeps wandering there and then making noise is it safe to spray some WD there to help keep it quiet?