Hmmm. Not sure. I made a curved one to loop up into the lower triple.
You got the vortex ones right? You'll have to contact their customer service and see which one is the correct one for the bike.
I'm at work or I would get you the OD of mine.
Took it down the road earlier. Progress is going well. I've got some new tires on the way and about to start painting my fairings. Re-shaped my undertail, I will be using a radiantz tail light now. Here is a good walkthrough on how to set the strip up. Pretty neat. I'm going to be stingy with the pictures now as to not spoil the surprise for anybody!
I was wondering if your right headlight survived? Its the last part I need.
Last edited by T-Wrecks; 09-21-2015 at 02:38 AM.
No. Both of my headlights are obliterated. I can get you a deal on a set though. Pm me
Ok so a little update, been moving among a few other stressful situations at home so things have been delayed. BUT. I managed to procure some very interesting parts and have decided to take this in a slightly different direction. Here in the mext week I will have an entirely new workspace and should expeditie project finalization. This is getting very exciting. The project will not be 100% before the end of the season but it will be presentable and functional by Oct 10th. Finishing touches and a few in depth things will wait until the snow falls. I just want to ride the damn thing now. Lol
The suspense is killing me! Ah!
Sneak peek! She's getting there
PicsArt_1443743291610.jpg
I want the EBR Intake Cover!!!!....
-J
Finally got time to work on it a bit today.
Showa BPF forks fitted and installed. Forks are a direct swap with 1125 showa 54mm cartridge forks, xb wheel is not compatible with the bpf's without modification. New bearings arrived today for the xb wheel to fit on the RX axle. I'll have to make some spacers as well.
20151130_155743.jpg
Last edited by heagachongoose; 11-30-2015 at 09:29 PM.
For future reference:
20151201_114551.jpg
What bearings did you use with 47mm OD and 30mm ID? For future reference. 1190 wheels use the same bearings as the 2010 Buell 3 bearing wheel.
Posting Permissions
Reply With Quote