Had a bit of time to work on things. Finally cracked open my cluster and it looks like it will still be functional. The only major deficiencies I spotted were an outer casing crack (easy fix), small polycarbonate fracture (another easy fix), and one of the buttons have been pulled off of the board (a not so easy fix). My hands aren't steady enough to handle that kind of precision so I will be visiting an electronics guru friend of mine to have the button re-soldered onto the board. After that it should button right up and work like a charm!
Note: The cluster disassembly is infinitely infuriating. remove all fragile objects and small children within the vicinity before attempting disassembly. Also my gasket between the two main outer shell pieces is a solid 1-2cm too large for the housing. Not sure how it got that stretched out....?
Link to disassembly walkthrough
Working on deciphering the buell wiring diagrams to figure out which wire plugs to which wire from the "left hand controls" connector plugs.
Ordered an R1 throttle tube and assembly, should be a plug and play swap for the whole thing buuuut we'll see..
Levers and grips arrived! Woo! I'll be running these until 50dro gets some more ASV's in stock. First impression seems good, much better quality than any other "cheap" levers I have encountered. These are US made.
20150714_124852.jpg
Other than that, not much progress since last time> Just not enough hours in a day
Sorry for the blurry pictures. About time for a new phone I think. Mine has been through a lot. lol
20150714_152026.jpg20150714_151854.jpg20150714_152638.jpg20150714_151912.jpg