Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Can anyone help diagnose?

  1. #11
    Junior Member
    Join Date
    Sep 2014
    Thanks everyone for the suggestions. After 3 weeks of research, testing, trial and error, it turns there were two issues. Chicknstripn was correct, the bike was overheating. I didn't know how to set the static timing with the '08 flywheel after the rebuild, because there is no timing mark. I basically listened for a smooth idle and rev. A week ago, i was working at night, after verifying for the 10th time that the regulator charges when the bike is cool, and let the bike warm to operating temperature. The exhausts were glowing red. It all came clear that the timing was retarded.

  2. #12
    Senior Member Chicknstripn's Avatar
    Join Date
    Aug 2014
    High Point, NC
    Check out the last post on this old thread. Might help you get you timing more in the ballpark.
    You might want to contact the company you got your build parts from. I know NRHS has a lot of helpful information on their site. Dan was real helpful during my build.
    Good luck

Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts