So i have an 07 xb12 with d&d pipes and open airbox, i'm no tuning wizard but i read everything and understand how it works. I took a download file someone on here made for an 09 with the same mods, hoping it would give me a good start, and the thing is way off. See the picture of the fuel tables below, my current one i used from the download on the left, and the one on the right is for a micron for comparison (I think from the ecmspy creator, not sure if airbox is modded)
After riding around trying to keep it in closed loop, i came back to the garage at 86 AFV. It idled ok but then gave it a little gas and it would struggle and stall, with a poof of smoke out the intake, so in other words does not run well.
My question, what is the best way to approach this? Lean out every cell a couple points? 10 points on the problematic areas? How do these tables look, is it really as rich as it appears?