Results 1 to 2 of 2

Thread: anybody interested in XB12 Monster Big Bore Kit

  1. #1
    Senior Member
    Join Date
    May 2010
    Location
    GOODLETTSVILLE,TN
    Posts
    895

    anybody interested in XB12 Monster Big Bore Kit

    I have a set of millinium monster big bore jugs,and 1 cp piston. They were removed, because the rear jug had a bad leak, There is only one piston because the original po dropped and broke the rear piston.You can see the cross hatch honing in the jugs still, there are some light scratches from removing the pistons, which will come out with a hone to deglaze them anyway.The bore was 98.6mm/3.88in. They are in great shape and have super low miles on them.I also have the lower have of the engine complete, that has been milled for these jugs. There is supposed to be a lightened flywheel, and a balanced crank, this was built on the xb9r engine.I have not verified that yet. Make a reasonable offer,or will take trades towards race pipe and ecm?

  2. #2
    Senior Member Phelan's Avatar
    Join Date
    Apr 2010
    Location
    Fort Collins, CO
    Posts
    181
    Interested if you still have this stuff. Please send pics to phelan_z06 at hotmail dot com.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •