Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Buell 1125CR High bars

  1. #1
    Senior Member
    Join Date
    Jan 2014
    Posts
    1,318

    Buell 1125CR High bars

    Selling a set of 1125CR highbars - read below

    These were on a wrecked 1125CR I just purchased, but I measured the bars on a flat surface and they do not appear to be tweaked at all. The entire steering head busted off before hurting the bars.
    But the bars do have some rash on the right side but shouldn't hurt anything.

    Not sure what a fair price is for them, but thinking $30+shipping


    Also if you are looking for anything else I will be parting most of the bike out (parts that arent damaged)
    It is a 2009 1125CR





  2. #2
    Senior Member
    Join Date
    Dec 2011
    Posts
    211
    I'd be interested in the flyscreen.

  3. #3
    Senior Member
    Join Date
    Jan 2014
    Posts
    1,318
    flyscreen was a total loss sorry.

  4. #4
    Senior Member
    Join Date
    Dec 2011
    Posts
    211
    Thanks anyways.

  5. #5
    Senior Member
    Join Date
    May 2010
    Location
    The Snow Belt
    Posts
    228
    Any pics of the wrecked bike? Maybe interested in some parts. Other than the windscreen, what condition are the fairings in?

  6. #6
    Senior Member
    Join Date
    Feb 2013
    Location
    Maryland
    Posts
    1,349
    Front caliper? $?

  7. #7
    Senior Member
    Join Date
    Jan 2014
    Posts
    1,318
    Front caliper was the main reason I purchased the bike, its going on my XB9SX sorry.

    Im going to start another thread for parts and try to list whats for sale, just started dismantling the bike last night.

  8. #8
    Senior Member
    Join Date
    Feb 2013
    Location
    Maryland
    Posts
    1,349
    Is this the bike out of Mo?

    Mirrors $?

  9. #9
    Senior Member
    Join Date
    Jan 2014
    Posts
    1,318
    Bike came out of Oklahoma.
    Never got the mirrors but looking at whats left of the perches they are trash. Ill look in my stash though i may have a set still.
    Frame is bad but still carries a clean title.
    1 fork leg is good other is bent but hardware is good (black/red cap)
    upper triple (CR only has some nicks but is ok), lower is ok but stem is bent
    Rear swingarm is undamaged
    Has stock ECM on the bike, havent plugged it in to check for tuning of any sort yet.

    This is what it looked like when it got to me, engine was drained of oil so no damage laying on its side.

  10. #10
    Senior Member
    Join Date
    Feb 2013
    Location
    Maryland
    Posts
    1,349
    Oh I was assuming it was the bike from your first picture.



Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •