Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Bluetooth Adapters

  1. #1
    Senior Member AZmidget91's Avatar
    Join Date
    Dec 2014
    Posts
    1,664

    Bluetooth Adapters

    As some of you know, I have been selling these on Facebook. I'm getting a little more ahead of the demand there, so I thought I would start offering them here.

    I don't take orders for these, I only sell them if I have them built, tested, and ready to ship. Message me for availability and my PayPal address.

    Bluetooth adapters, $69 shipped work wide, Backed by Michael Cobb of Xoptiinside.com. For use with TunerPro RT, ECMDroid, and ECMSpy. Use to datalog, read and write EEPROM, read/clear trouble codes, various diagnostics test…

    Works on all EFI Buells, tube frame to EBR.

    These are very well sealed, but I do not recommend using in the rain, just in case. Also, I don't recommend leaving plugged in at all times, mine has been plugged in for months with no issues, but just a precaution.

    Visit www.Xoptiinside.com for custom maps

    ***Tuning your bike can be dangerous, don't do it if you don't know what you are doing. I am not responsible for your mistakes. ***





    I have been improving my quality over time, I now use a higher quality heat shrink and sleeving shown on the bottom
    Last edited by AZmidget91; 04-17-2016 at 01:31 PM.

  2. #2
    Senior Member AZmidget91's Avatar
    Join Date
    Dec 2014
    Posts
    1,664
    I will try to keep this thread updated with my availability.

    I have 6 available right now.

  3. #3
    Senior Member
    Join Date
    Aug 2012
    Posts
    2,408
    I would like to order one, I dont want a pre built one, I will wait for one to be built later. I would also like a custom etching that say "Harley" and I want it orange, but not too orange, gotta off set it with black.

  4. #4
    Senior Member AZmidget91's Avatar
    Join Date
    Dec 2014
    Posts
    1,664
    And where exactly do you plan on putting this custom dongle?


  5. #5
    Senior Member
    Join Date
    Aug 2012
    Posts
    2,408
    The dongle is in the front, so obviously in my left ear

  6. #6
    Senior Member DougH's Avatar
    Join Date
    Jun 2015
    Location
    Ohio
    Posts
    205
    You sure it shouldn't go in the rear? That might be a lightning conversion.

  7. #7
    Senior Member AZmidget91's Avatar
    Join Date
    Dec 2014
    Posts
    1,664
    Oh, there has definitely been a "conversion" on that bike

  8. #8
    Senior Member
    Join Date
    Aug 2012
    Posts
    2,408
    Shut up Doug. Killed a good joke

  9. #9
    Senior Member AZmidget91's Avatar
    Join Date
    Dec 2014
    Posts
    1,664
    I know right?!


  10. #10
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    I would also like a custom etching that say "Harley" and I want it orange, but not too orange, gotta off set it with black. Ray Liotta Laughing In Goodfellas.jpg

    cracks me up jacob!



Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •