Reply With QuoteWell it could be in the wiring between the switch and the light. You could do a continuity test to be sure before you spend some money on a new switch.
My brake light does not come on when I use the rear brake but works fine with front brake. My first thought is the rear brake switch needs replacing, but before I buy a new one, are there other possible reasons for it not working?
Well it could be in the wiring between the switch and the light. You could do a continuity test to be sure before you spend some money on a new switch.
I have my money on the rear brake switch.
But definitely do a continuity/voltage test with a multi meter before you buy anything.
Key on.
Unplug the connector at the rear brake light switch and jumper the 2 wires together with a paperclip or something. Don't let it touch metal.
If the brake light is on now. Replace the switch.
If not, you should have +12V at BOTH of the terminals on the bottom of the bulb socket with it still jumped (careful not to ground the test lead to the sides of the socket)
If you do have +12V at both terminals (with the switch jumped) clean the socket and replace the bulb.
To check wiring:
At the switch you should have +12V on one wire, and if you put 12V on the wire that doesn't have voltage with the key on you should get a brake light.
Last edited by Cooter; 03-05-2016 at 08:19 PM.
Nice Cooter!
Anyone having issues with a rear brake switch should be able to trouble shoot it now!
Good advice man
Awww, shucksOriginally Posted by Chicknstripn
That's super nice without the comma
Thanks guys! Shouldn't be the bulb since the light comes on when I use front brake, so I will check continuity and voltage when I get a chance.
Mine doesn't work either, but it's probably from not having a switch....
Haha. It isn't too horrible for me, since I rarely use the rear brake for actual braking. I mostly use it at stoplights to rest my right hand.
the problem you both are experiencing is mis-alignment of your right ankles, please re-calibrate and post pics so we can review and help determine if the problem is resolved.
Posting Permissions
