Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: ECMspy

  1. #21
    Senior Member Chicknstripn's Avatar
    Join Date
    Aug 2014
    Location
    High Point, NC
    Posts
    2,138
    If you have a Bluetooth dongle on the way then go to the google play store and download ecmdroid. It’s free

  2. #22
    Junior Member
    Join Date
    Apr 2019
    Posts
    17
    How easy is it to work with fuel mapping and ignition mapping on ecmdroid?

  3. #23
    Senior Member lowkey's Avatar
    Join Date
    Sep 2012
    Location
    Bullhead AZ
    Posts
    735
    Quote Originally Posted by WILLIAMK View Post
    How easy is it to work with fuel mapping and ignition mapping on ecmdroid?
    Unless you know how to edit the hexadecimal data you can't. It can be done but your chances of screwing it up is about 99.5%.

    TunerProRT is free and can do everything possible. the needed files to work with your ECM can be found on the ECMSpy website, read a ton before doing anything.
    Last edited by lowkey; 04-14-2019 at 01:01 AM.

  4. #24
    Junior Member
    Join Date
    Apr 2019
    Posts
    17
    I have done a lot of mapping and tuning on the dyno, using winpep and dyno jet software mostly, I know what to do when I get the maps it’s just getting to that point that seems to be difficult, I just want to make sure I am getting everything I need, hence why I am looking through old threads

  5. #25
    Senior Member lowkey's Avatar
    Join Date
    Sep 2012
    Location
    Bullhead AZ
    Posts
    735
    Then follow the second half of my above post. Do yourself a favor and buy a USB communication cable.



Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •