Results 1 to 3 of 3

Thread: XB9SX Idle/Take off issue

  1. #1
    Junior Member
    Join Date
    Apr 2016
    Posts
    9

    XB9SX Idle/Take off issue

    Hey everyone, I have a weird issue and I have done some research in here to try to figure it out, but I'm not seeing anything quite like my setup.

    2006 XB9SX 8,000 miles Micron Exhaust with aftermarket intake filter and crank case breather mod. All done at Harley dealer including dyno and tune.

    Issue is 1: which I think may be normal? Oil coming out of breather - but there is no drain catch, so nowhere else for oil to go?

    Issue 2: Rough idle when taking off in 1st gear only. Kind of a pop sound from intake and wants to die have to give it seemingly excessive gas to keep it going.

    Thanks in advance!

  2. #2
    Senior Member
    Join Date
    Mar 2015
    Location
    California
    Posts
    417
    For issue 1, you should install a catch can for the breather line. I would point you to ASB, but they have closed operations...

  3. #3
    Junior Member
    Join Date
    Apr 2016
    Posts
    9
    I was looking at making one. I saw the write up on that. Thanks!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •