This is what it is telling me:
Never had this issue before and not sure how to fix it. I changed parameter for filter and still no bueno.
Check out the parameters you have set for the filter on the VE analyzer... Something somewhere in there is making it filter everything normal out...
This is what it is telling me:
Never had this issue before and not sure how to fix it. I changed parameter for filter and still no bueno.
And just for the record. I have the filter set to off in VE Analyzer.
Wanted to update. Updated Megalog and it fixed the filer issue.
Been looking for this program. Thanks all.
Gettin ready to use ECMspy, just waiting on the cable. But I've been doing some reading on there website. And believe I have to do process 2. But I mostly just want to do a tps reset. Then go from there.
My question is when it asks if I have, standard control. Are they referring to my ECM, stock or race? I have a race and don't know if I should put the stock back in.
Sorry if this was the wrong thread to post this, I just searched ECMspy and seen this was the most current.
04 xb12s
Thanx, DiRT
Brilliant tutorial, hats off to the author.
i've a question regarding step one. After you've ran the ve analyzer it says "If I had any numbers go red I put them back to the original numbers for now"
why is this?
I take it that its reducing pulse width, why is that bad?
Thanks
ok, heres another question. After I datalog I've read in the Buell tuning guide that I need to change the values AFV to Afr, EGO Corr. to Gego, and EGO Volt. to O2. Only problem is there is no EGO Volt in my sheet? What's up with that? Did some things change since tuning guide was written. I've noticed there are Gego and 02 lines already in there. Also this thread says nothing about it? Do we no longer need to change these values?
Doe this procedure work on 09 xb12r models sry for the noob question its just im fixing to buy this and order cable so I can tune myself because I can't find no one that will do it im lil nervous but I guess I got no choice :(