Page 1 of 4 123 ... LastLast
Results 1 to 10 of 33

Thread: NGK Iridiums??

  1. #1
    Senior Member
    Join Date
    May 2009
    Posts
    138
    Anyone have any luck finding NGK Iridiums for the 09 XB9SX. I work at Napa and have close ties to the NGK boys, but unable to find one or any feedback on them.

  2. #2
    Senior Member
    Join Date
    Jun 2008
    Posts
    289
    I believe they are the same as all the others. (DCPR8EIX)

  3. #3

  4. #4
    I found them at autozone NGK DCPR9EIX their part number for it is NGK 2316.They had them in stock

  5. #5
    Senior Member
    Join Date
    Mar 2009
    Posts
    240

  6. #6
    Senior Member
    Join Date
    Mar 2009
    Posts
    340
    Chase112s I switched to the 2316 plugs and found them to have quite a better spark, this eliminated
    plug fouling of my rear cylinder. I am sure I caused the fouling by touching the throttle before firing up, but a difference was noticed by the change.

    Bill R.

  7. #7
    Senior Member
    Join Date
    May 2009
    Posts
    138
    thanks guys. I've run NGKs in everything I have with wheels. I found them to be better than most. In my car I run a cold plug and close the gap 10 thou. gets more power and a little better economy. Wanted stock stuff out of the bike ASAP.

  8. #8
    Senior Member xtremelow's Avatar
    Join Date
    May 2007
    Posts
    6,243
    I just ordered my from Americansportbike.com if you still needed a place to find them.

  9. #9
    Junior Member
    Join Date
    Mar 2009
    Posts
    4
    These the same plungs for the xb12/s right?

  10. #10
    Senior Member
    Join Date
    Aug 2008
    Posts
    5,146
    These the same plungs for the xb12/s right?
    Yep. - DCPR9EIX



Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •