Thanks for sharing!
http://www.erikbuellracing.com/store...nting-kit.html
these things effin rock, got them on both my bikes fantastic upgrade
Thanks for sharing!
hey tom: quick question for ya before i pull the trigger on this....and thanks a ton for posting this up by the way......my 2009 cherry bomb cityX had pulsing lever....really annoying as hell. installed new ebc rotor and ebc pads with drain, flush, refill and bleed. still pulses but not nearly as much? does this hardware kit fix such annoyance? thanks much because i'm at a loss.
That being said I'll share my experience. I switched from a stock pulsating setup to the EBR rotor, EBC HH pads (bought from some guy that lives in amish land), and solid mount hardware. All pulsating has disappeared and not returned.
Last edited by oh9bolt; 11-10-2016 at 05:28 PM.
I must have been lucky, the guy I have dealt with has been more than helpful to me!!
Last edited by oh9bolt; 11-10-2016 at 05:51 PM.
$13.15 to ship to MD, UPS ground! That seems extreme for something that should only weigh a couple ounces.
yes it does but I think I traced that pulse to filth built up in the springs of the stock floating mounts... this kit eliminates the springs so you never have to flush those springs out
also, the brake feel is very uniform and consistent.. makes me wish I had TL2 brakes.. I bet it would be fkkkin fantastic
Last edited by Gloomshadow; 11-14-2016 at 04:21 PM.