Page 16 of 17 FirstFirst ... 614151617 LastLast
Results 151 to 160 of 167

Thread: DDFI-3 tuning with stock o2 sensor

  1. #151
    Senior Member Mesozoic's Avatar
    Join Date
    Jul 2008
    Location
    Tucson, AZ
    Posts
    383
    I think you need the Digital Technician software to update the actual firmware binary on the ECM, eg. BUEZD to BUE2D. I'm sure someone may have figured out how to do this, but the dealership can probably do this readily.

  2. #152
    Junior Member
    Join Date
    Mar 2015
    Posts
    9
    Quote Originally Posted by Mesozoic View Post
    I think you need the Digital Technician software to update the actual firmware binary on the ECM, eg. BUEZD to BUE2D. I'm sure someone may have figured out how to do this, but the dealership can probably do this readily.
    Ok. I just called IDS to see if they could/would shine any light on it. They couldn't one way or the other. Only thing I was able to confirm is that the hardware is 100% identical, so in theory it will work. The true question comes down to whether or not the hex file that is pulled from the ECM is a complete hex file or not. If it is, then it should be just as simple as read an 09, write to an 08.

    I'm probably going to try and contact the guys at ECMspy next.

    The attached screenshot is interesting......
    Attached Images Attached Images
    Last edited by Lnhiv; 10-09-2018 at 09:16 PM.

  3. #153
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    The firmware still needs to match and as of today it’s still only a part of the whole ‘dealer update’.

    Even thought the hardware is identical, Different firmware versions do things like put the fuel map in different locations in the memory causing catastrophic problems if forced through.

  4. #154
    Junior Member
    Join Date
    Mar 2015
    Posts
    9
    Quote Originally Posted by Cooter View Post
    The firmware still needs to match and as of today it’s still only a part of the whole ‘dealer update’.

    Even thought the hardware is identical, Different firmware versions do things like put the fuel map in different locations in the memory causing catastrophic problems if forced through.
    Makes sense...that's what I need to know. Thanks!

  5. #155
    Senior Member rb70383's Avatar
    Join Date
    Jul 2008
    Posts
    481
    Well, any new news? Still a dealer only thing? Of course I have the BUEOD ecm and want to run dual O2's....

  6. #156
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    I don't foresee any changes besides visiting a HD dealer for a whole firmware/fuel map update. Maybe you get lucky? Try calling Buelltooth, I know they've been working on lots of stuff and might have an ECM for ya. Alternatively, an E-bay ECM from a later bike might have BUE2D already in it and you could tune accordingly.

  7. #157
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Cooter- I’m still waiting for the tune you promised for my S1. WTF?!?!?

  8. #158
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Let me Google that for you. Just wait...

    When you think its been too long, I'm almost done, hang in there

  9. #159
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Quote Originally Posted by Cooter View Post
    Let me Google that for you. Just wait...

    When you think its been too long, I'm almost done, hang in there

    I want the Race tune also. 150hp!

  10. #160
    Senior Member rb70383's Avatar
    Join Date
    Jul 2008
    Posts
    481
    I haven't found anything about being able to reflash. I do have an 09 ECM on the way as well also. I might get this thing swapped over yet.

    I want in on this race tune....



Page 16 of 17 FirstFirst ... 614151617 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •