Page 52 of 71 FirstFirst ... 242505152535462 ... LastLast
Results 511 to 520 of 702

Thread: Well.....Bye.

  1. #511
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Wow Opto, thats rare to say the least... and to BOTH of them simultaneously?

    I'm just spitballing, but I wonder if it's a combo of condensation in the fluid (brake fluid is hygroscopic) and being frozen in your garage? I'm guessing its not heated and you're way up there where theres more mooses than peoples

    No matter, re-build kits are less than $20 and it's a cinch to pop out the snap ring to swap the pistons, flush and bleed with DOT 4 like the cap says. EZ PZ.

  2. #512
    Senior Member
    Join Date
    Jan 2016
    Posts
    282
    Actually rarer yet as I checked the rear brake master and it is pretty funky also- a trifecta! The bike never froze as I keep a bit of heat on --There are canned goods in there as well as laundry so freezing would be a disaster.

    Believe it or not but we have electricity to the property and everything. I think there are considerably more drug addicts then moose in the region.

    I have been thinking of Mendicino County quite a bit of late.

    Opto

  3. #513
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Since Stella doesn't need anything (as usual) and the EBR is prepped and ready for the next track day at LVMS, I might as well do a slightly early service on the Brutalé. I find it very comforting to work late on this quiet Sunday night. Ya I know I'm weird

    D83D3DC7-193B-460B-95E1-D14018C12802.jpg
    B7D365EB-50CB-4CB4-9089-497568A2C108.jpg

    At least I don't have to split this one in HALF (Ahem, cough, cough)

  4. #514
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Theres a couple out by .002mm but being shim under bucket I'll get all cray-cray-middle-of-the-spec perfect, and hopefully avoid having to do it again at the next service.

    In the meantime I had a great day yesterday finishing little details of the perfect bike hauler Josephine Dirté!
    First I swapped the open carrier for a posi unit. The 3.08's are fine for long distance at speed and it's still pathetic to buy anything for a 8.2" rear but heck, I really need to leave 11's! The one tire fire ain't cutting it and donuts>burnouts
    AFC04A6C-130D-4A74-B446-CF00EED70139.jpg

    It was an easy swap, thankfully got a good pattern first try! So feeling good, I decided to attack the worst bit of cancer on the rear 1/4. I'm NO body man, but I'd never use construction foam to fix sheet metal. Grrrr.
    389C1DB7-E79E-4309-9809-72D64F70859A.jpg099CF18C-7F14-43DE-9CD4-6A0ACA1F63DC.jpg
    Gross.
    Last edited by Cooter; 03-02-2020 at 05:15 AM.

  5. #515
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    I had bought one of those air powered flanging/punch tools and for $39 it worked really well to prep the edge of the 1/4 panel and punch spot weld holes in the patch panel
    F8252596-D48E-49F4-AB5A-04250F3AE292.jpg
    Just a little bondo and sanding later...
    Lucky me! I found a can of Krylon high temp silver BBQ paint that actually matches the "Millennium Falcon silver" on the truck pretty well 821C54E4-3A3F-47BB-B043-212CBE1F03BE.jpg
    Attached Images Attached Images

  6. #516
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Bubbles and I had realized that 2 bikes and overnight camping gear is a little much for the tiny El Co bed. We need a little more room for stuff and the added utility of a trailer hitch would be a welcome addition. It IS a truck ya know

    When I put the ebay rear bumper on the JK I just sold, it came with a hitch in it, so I had removed the stock "tow package" bolt on receiver. Guess where it ended up?
    Some 1/4" thick angle to the frame rails and a 2x3" 1/4 wall sq tube makes for a stout hitch. I pity the Foo who rear ends me now!
    B3F737B6-C8CC-4FF5-A48D-AB8FD42228FE.jpg
    E77A43DB-7F4B-4FEF-9A52-99EAF23C05E4.jpg
    0FDEAE53-50BF-47FD-9390-F2B52F8B8ABC.jpg
    sorry for the pics from Australia

    I added an old flip down plate bracket from a 90's IROC Camaro, wired up a 4-pin plug and Bam! All hitched up
    Last edited by Cooter; 03-02-2020 at 07:46 AM.

  7. #517
    Senior Member rb70383's Avatar
    Join Date
    Jul 2008
    Posts
    481
    Are there supposed to be pics?

  8. #518
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Been Social Distancing with friends in the Angeles Forest a lot lately. With all the track days cancelled, I'm seriously considering putting a headlight and signals on the EBR race plastics. I miss my girl! The Brutalé will have to do and frankly it does really really well

  9. #519
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    But for now I'll try to stay motivated and add some more car content to my rambling thread. Hey man, its MY thread! LOL

    Thankfully we got most of the jobs in the shop all done and shipped before the shut-down so I pulled out and zero-ed the chassis for the '57 again
    If you are keeping score the SBC turned into the BBC from the roll-over Blazer (Lord please help me down this wormhole), mocked up a crossmember to hold the body mounts, trailing arm pivots, and frame bracing, and set in the exhaust. I REALLY want to have full exhaust, I remember how LOUD this engine is through dual Flowmasters.

  10. #520
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    The '2-piece' 57 frame is really thin, so I feel I need to make weld-plate for all the attachment points.

    And horrific old frame 'repairs'. Ugh. I had to patch a big hole from the inside, grind flush, make this plate and attach it. Then do the other side.



Page 52 of 71 FirstFirst ... 242505152535462 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •