Results 1 to 5 of 5

Thread: EBR ECM fan operation.

  1. #1
    Senior Member Dellinger's Avatar
    Join Date
    Jul 2014
    Location
    El Dorado County CA
    Posts
    430

    EBR ECM fan operation.

    I have an 08 XB12. I have an EBR ECM in it.

    Normally when I start the bike it gets to temp and the fan comes on. When I start riding it hits like 10 MPH and the fan starts till I stop. This is normal function.

    What mine does different is at the start up the fan doesn't come on when it gets to temp. What causes the first fan prompt? I'm thinking this is where I need to look.

    I have already done a function test with ECMdroid and and it works. It also comes on with movement like it's supposed to.

    Open/closed loop? Temp sensor? I don't know where to look.

  2. #2
    Senior Member GregoXB's Avatar
    Join Date
    Feb 2012
    Posts
    1,543
    It's fine. Fan will run if you let the bike idle long enough after start up.

  3. #3
    Senior Member Dellinger's Avatar
    Join Date
    Jul 2014
    Location
    El Dorado County CA
    Posts
    430
    I know. It has always turned on after Les than 5 minutes in the past. I have let it idol for 10 minutes before riding just waiting for it. I don't want to be stranded someday soon. Could a 02 or head temp sensor be getting lazy? It is different than it has ever been.

  4. #4
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    You can use the same ECMDroid to datalog the temp sensor to see if it's reading correctly.

  5. #5
    Senior Member Dellinger's Avatar
    Join Date
    Jul 2014
    Location
    El Dorado County CA
    Posts
    430
    Thanks.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •