Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Tubber cafe racer!

  1. #11
    Senior Member pdksh's Avatar
    Join Date
    Nov 2016
    Location
    Ontario
    Posts
    274
    taking advantage of some downtime to move the X1 project forward.
    - carbon fibre under tail tray and rear fender eliminator kit
    - rizoma bar end mirrors
    - finally stripped and polished the rear tail section.

    I used permix gasket remover, sprayed down the tail section (off the bike) and let it sit for 10 or so minutes. The clear powder coat literally pealed off. I then wet sanded: 400grit, 600grit, 800grit, extra fine sanding pad (1000grit) then polished with a fitting on the drill. I can still see the sand marks. I suspect the 400/600 grit may have been too harsh. The aluminum was in good shape, after the clear coat came off. I plan on picking up some 800/1000/1200/1400 grit and getting those sand marks out.
    Not much riding in January in Canada.


    IMG_2421_small.jpg

  2. #12
    Senior Member
    Join Date
    Mar 2015
    Posts
    1,433
    Dang! Between you and SR... you two have all the neat toys!

  3. #13
    Junior Member
    Join Date
    May 2019
    Posts
    2
    Beautiful work! I gotta say, the tail-tidy makes a world of difference!



Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •