Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Levers

  1. #1

    Levers

    I bought a used 2010 12r. This is my first buell, and I love it. However, I need a new clutch lever. They seem impossible to find for this model year. Anyone know where I can find some aftermarket levers?

  2. #2
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,501
    a discussion on this link
    http://www.buellxb.com/forum/showthr...-Clutch-Levers

    1997-2003 inclusive suzuki gsx-r 600 levers direct interchange with factory XB levers HOWEVER you must lightly massage the interface on the brake lever where it contacts the master cylinder piston. just remove a bit of material from the lever itself.

    IMPORTANT: whatever levers you go with be DAMN CERTAIN there is an air-gap between m/c plunger tip and interface of brake lever when installed or you'll have huge problems bordering on death-inducing. ALSO....the factory was interchanging master cylinders during the 2010 model year. there is no consistency. what one 2010 model year owner says worked for his lever conversion project may NOT work on your bike. keep that in mind.
    Last edited by lunaticfringe; 08-17-2017 at 12:29 PM.

  3. #3
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    6,814
    X eleventy-million^^^^^^^

  4. #4
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,552
    Is this Chicago ???? again .

  5. #5
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,501
    Quote Originally Posted by Silverrider View Post
    Is this Chicago ???? again .

    LOL @ you son!
    it does seem a bit suspect doesn't it?

  6. #6
    Senior Member Dobe1's Avatar
    Join Date
    Oct 2013
    Location
    Alexandria VA
    Posts
    162

  7. #7
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,552
    Quote Originally Posted by squirrelcakes View Post
    I bought a used 2010 12r. This is my first buell, and I love it. However, I need a new clutch lever. They seem impossible to find for this model year. Anyone know where I can find some aftermarket levers?
    Hello , Squirrelcakes welcome to the board,

    Revzilla Is a good place to start for after market levers, I was able to find a pair for my XBs and EBR if you can believe that .

    https://www.revzilla.com/motorcycle/...iABEgIwFvD_BwE

  8. #8
    I recommend buying from a reputable member he sells ASV Levers for a good price and knows what he is doing. I will send him a link to this.


    If you are looking for a stock black clutch lever I have one I will let go.
    Last edited by oh9bolt; 08-17-2017 at 11:24 PM.

  9. #9
    Senior Member 50dro's Avatar
    Join Date
    Apr 2009
    Posts
    5,600
    Quote Originally Posted by oh9bolt View Post
    I recommend buying from a reputable member he sells ASV Levers for a good price and knows what he is doing. I will send him a link to this.


    If you are looking for a stock black clutch lever I have one I will let go.
    Here I am! 😎

    Let me know if you're interested in an ASV set. They're not cheap, but worth every penny imo. We sell them at the lowest price allowable. $162/set for the F3 model and $225/set for the c/5 model. Prices are shipped CONUS. Thanks!

  10. #10
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,552
    Quote Originally Posted by 50dro View Post
    Here I am! ��

    Let me know if you're interested in an ASV set. They're not cheap, but worth every penny imo. We sell them at the lowest price allowable. $162/set for the F3 model and $225/set for the c/5 model. Prices are shipped CONUS. Thanks!
    That is a good price Rev sells them for $125. each .https://www.revzilla.com/motorcycle/...t-clutch-lever IMHO C/5 are the best


    Last edited by Silverrider; 08-17-2017 at 11:47 PM.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •