LED bulbs in stock sockets

[midway]

Bulbs fit nicely with room to spare. VERY bright! great color and give excellent indication from the side Amazon link below
EP36 flasher from any auto part store will slow them down.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

https://www.ebay.com/itm/Novita-Elec...FXGwaS&vxp=mtr

Please take extreme care when removing the Y0039.K GENUINE BUELL OUTER TURN SIGNAL LENS.
Best to remove the screw and just loosen the lens enough to slip a tiny flat tip under the base reflector and free that up before taking the lens all the way off at a 45 degree angle.

[njloco]

Cool !

[snrusnak]

Looks great. I was going to try to do the same but the dang flexible part of the flasher's shaft cracked on me! So had to go aftermarket.

[lwclancers]

Can't decide to save my life on aftermarket turn signals. Might go this route!

[midway]

These are still an excellent upgrade for the stock signals IMO. But please beware of the lens cover removal. This should be where your focus is for the mod or you'll need new lenses for sure. Irritating if broken but replacements are available if needed. Has anyone found a way to salvage a broken lense? Hate to toss them out.

part number Y0039.K